HP Removable Adhesive Fabric

Print high-quality, repositionable graphics that stick to non-porous surfaces

Easy to install, reposition, and remove
Enjoy the ease of working with this repositionable adhesive-back fabric that is easy to install, reposition, and remove with virtually no residue. The special adhesive is designed to stick to non-porous surfaces to create seamless, photographic image quality wall graphics. Tested and approved for indoor smooth floor graphics.1

REACH compliant2
Offer an adhesive fabric that complies with high health standards. Help meet environmental and safety objectives with this flame-resistant,3 adhesive fabric. HP Removable Adhesive Fabric is REACH compliant>sup>2—a regulation of the European Union adopted to improve the protection of human health and the environment from risks that can be posed by chemicals.

Grab attention with vibrant image quality for a variety of applications
Capture realistic graphic detail for applications from wall murals and event signage to retail displays. Achieve a high-quality look with this versatile, easy-to-handle, repositionable self-adhesive fabric—ideal for a wide range of indoor and outdoor applications.

Target customersApplicationsBenefits
Print service providersWall muralsDesigned for easy installation, repositioning, and removal without wrinkles or tearing for a wide range of applications
Government agenciesWall cut-outsAbility to contour cut and apply without stretching
Graphic artistsIndoor and short-term outdoor signageSmooth, matte finish for deep blacks, vivid colors and high ink saturation
Sign shopsPoint-of-purchase displaysOutstanding photographic image quality
RetailTrade show graphicsClass A, ASTM E84 flame resistance3
DecalsCompatible with Original HP Bright Office Inks, HP Vivid Photo Inks, HP PageWide XL and HP Latex Inks
Window graphicsSlip resistant for floor graphics1
Floor graphics

Technical Specifications

Ink compatibilityHP Bright Office Inks, HP Vivid Photo Inks, PageWide XL and HP Latex Inks
MaterialPolyester fabric
Weight (With liner)289 g/m² per ISO 536 Test Method
Thickness (With liner)304 microns/12 mil per ISO 20534 Test Method
Liner120 g/m², double-sided PE-coated silicone paper
AdhesiveClear, removable, and repositionable adhesive
RemovabilityUp to 3 years removable/repositionable indoors
Opacity>85% per TAPPI T-425 Test Method and ISO 2471 Test Method
Brightness>87 per Tappi-T452 Test Method
Whiteness118 per ASTM E313-98 Test Method
FinishMatte
Slip ratingCertified according to ANSI A137.1/A326.3 and AS HB198:2014 (AS/NZS 4586)1
Operating temperature15 to 25° C / 59 to 77° F
Operating humidity20 to 80% RH
Water resistanceModerately water-resistant4
Wind orientationPrint side out
Core size3-in core with a removable 2-in core adapter
Dry timeImmediate
Flame resistanceClass A, ASTM E84 approved fire certifications3
LaminationFor additional protection, liquid or spray coatings are recommended
PageWide CutterThe weight of this material is higher than the recommended weight limit for the HP PageWide XL cutter, which may reduce the expected life of the cutter
Shelf life1 year, unopened in original packaging
Storage temperature10 to 27° C / 50 to 80° F
Storage humidity35 to 65% RH
EnvironmentalREACH compliant2
Finishing/post-processingUse a carbide knife for kiss and die-cutting
Installation tipTo install the graphic, peel 101 millimeters (4 inches) of the release liner off the graphic and place on wall or surface. Continue to peel back 101 millimeters (4 inches) of the liner incrementally while mounting.
Country of originProduct of China

Ordering Information

Product NumberRoll SizesUPCRegion
8SU04A610 mm x 30,5 m (24 in x 100 ft)848412025675United States, Europe
8SU05A914 mm x 30,5 m (36 in x 100 ft)848412025682United States, Europe
8SU06A1067 mm x 30,5 m (42 in x 100 ft)848412025699United States, Europe
8SU08A1372 mm x 30,5 m (54 in x 100 ft)848412025729United States, Europe
8SU09A1524 mm x 30,5 m (60 in x 100 ft)848412025736United States, Europe

Warranty Statement

HP large format printing materials are free from defects in materials and workmanship. For warranty statement, please see HPLFMedia.com/en/mediawarranties. To obtain warranty service, please contact BMG customer support at HPLFMedia.com/hp/en/contactus.

📘

Footnotes

1Recommended on indoor smooth, non-porous, sealed flat and dry surfaces for up 3 months. Slip resistance for dry environments based on third-party testing, June 2020, according to ANSI A137.1/A326.3 and AS HB198:2014 (AS/NZS 4586).
2Class A, ASTM E84 approved fire certifications.
33Performance varies based on printer and print profile. Water resistance testing by HP Image Permanence Lab on a range of HP media and follows ISO 18935 method. For more information, see HPLFMedia.com/hp/printpermanence.
4See HP REACH Declaration published at HP Printing Products and Consumable Supplies.

👍

Download Available

PDF - US