HP Matte Polymeric Overlaminate

High-performance UV polymeric matte overlaminate and print film

Produce brilliant image quality—print film doubles as overlaminate

Gain double value with prints and overlaminate
Print high-quality, detailed graphics with this high-performance, calendered polymeric vinyl with a matte finish for indoor and outdoor signs and vehicle graphics. HP Matte Polymeric Overlaminate can also double as an overlaminate for printed images with the utmost protection. Provides durable print performance with over 6 years commercial in-window unlaminated display permanence.[1] Tested and approved overlaminate for indoor smooth floor graphics, up to 3 months.[2]

Differentiate with environmental certifications
Offer a vinyl that complies with high health standards. HP Matte Polymeric Overlaminate is flame resistant[3] and REACH compliant[4] —a regulation of the European Union adopted to improve the protection of human health and the environment. With an end-to-end approach, the HP Latex printing system continues to drive a greater sustainable impact in large-format printing.

Save time with a reliable, total HP solution
Original HP printing materials, Original HP inks, and HP large format printers are designed to work together as a system to provide reliable, consistent, quality results that help save time.

Target customersApplicationsBenefits
Print service providersOverlaminate solutionHigh-performance UV polymeric calendered vinyl with dual use: brilliant image quality and an overlaminate for protection
Print film solutionEase of handling with the lay-flat double-sided, PE-coated silicone release liner
Indoor and outdoor signageProvides reassurance with REACH compliance4
Window graphicsCompatible with Original HP Latex Inks; also solvent, low-solvent, and UV-curable inks
Fleet graphicsFlame-resistant material3
Floor graphicsSlip resistant per ANSI A137.1/A326.3 certified
safe for floor graphics; European standard
DIN 51130:2014 R9 slip rating, British pendulum
dynamic coefficient of friction slip test2

Technical Specifications

Ink compatibilityCompatible with Original HP Latex Inks; also solvent, low-solvent, and UV-curable inks
Thickness (base vinyl)76 microns/3 mil per ISO 20534 Test Method
Base vinylCalendered high-performance polymeric vinyl with UV inhibitors
Liner140 g/m² double-sided PE-coated silicone paper
AdhesiveClear, permanent pressure-sensitive adhesive
FinishMatte, less than 10 gloss units at 60˚ reflection
Display permanence
(Commercial in-window)
Over 6 years unlaminated with HP 886 and 882 Latex Inks printed on the HP Latex R2000 Printer series5
Indoor floor durabilityRecommended on indoor smooth, non-porous, sealed flat and dry surfaces for up to 3 months
Slip ratingCertified according to ANSI A137.1/A326.3 and AS HB198:2014 (AS/NZS 4586)6
Minimum application temperature4 to 35˚C (39 to 95˚F) on clean, dry surfaces
Service temperature-40 to 65˚C (-40˚ to 149˚F)7
Operating temperature15 to 35˚C (59 to 95˚F)
Operating humidity40 to 60% RH
LaminationCold lamination
Shelf life2 years, unopened in original packaging
Storage temperature21 to 23˚C (69 to 73˚F)
Storage humidity50% RH
Flame resistanceB1 approved fire certification
EnvironmentalREACH compliant4
Country of originProduct of the United States

Ordering Information

Product NumberRoll SizesUPCRegion
1TH72A1372 mm x 45,7 m (54 in x 150 ft)848412024562United States, Canada, and Latin America
1TH73A1524 mm x 45,7 m (60 in x 150 ft)848412024579United States, Canada, and Latin America

300

Warranty Statement

HP large format printing materials are free from defects in materials and workmanship. For warranty statement, please see HPLFMedia.com/go/mediawarranties. To obtain warranty service, please contact Brand Management Group customer support at HPLFMedia.com/hp/en/contactus.

📘

Footnotes

1 With HP 886 and 882 Latex Inks printed on the HP Latex R2000 Printer series. Interior in-window display ratings by HP Image Permanence Lab on a range of HP media. HP predictions based on test data under Xenon-Arc illuminant — calculation assumes 6,000 Lux/12 hr day. For more information, see HPLFMedia.com/hp/printpermanence. 2 Recommended on indoor smooth, non-porous, sealed flat and dry surfaces for up to 3 months. Slip resistance for dry environments based on testing by SotterEngineering Corporation, June 2020, according to ANSI A137.1/A326.3 and AS HB198:2014 (AS/NZS 4586). 3 B1 approved fire certification. 4 Based on HP internal analysis, June 2023, this product does not contain any of the chemicals on the EU’s Candidate List for Authorization (otherwise known as Substances of Very High Concern) in concentrations exceeding 0.1%. To determine the status of SVHC in HP products, see the HP REACH Article 33 Declaration published at HP Printing Products and Consumable Supplies. 5 Interior in-window display ratings by HP Image Permanence Lab on a range of HP media. HP predictions based on test data under Xenon-Arc illuminant — calculation assumes 6,000 Lux/12 hr day. For more information, see HPLFMedia.com/hp/printpermanence. 6 Slip resistance for dry environments based on testing by Sotter Engineering Corporation, June 2020, according to ANSI A137.1/A326.3 and AS HB198:2014 (AS/NZS 4586). 7 Based on internal HP testing exposure at -40°C (-40°F)/53% RH for 24 hours does not appear to have any effect on the peel strength from the substrate.

👍

Download Available

PDF - US