HP Gloss Polymeric Overlaminate - EMEA

Produce brilliant image quality—print film doubles as
overlaminate

3184

Gain double value with prints and overlaminate
Print high-quality, detailed graphics with this high-performance, calendered vinyl with a high-gloss finish for indoor and outdoor signs and vehicle graphics. HP Gloss Polymeric Overlaminate can also double as an overlaminate for printed images with the utmost protection. Provides durable print performance with over 10 years laminated display permanence.[1] Tested and approved overlaminate for indoor smooth floor graphics.

Differentiate with environmental certifications
Offer a vinyl that complies with high health standards. HP Gloss Polymeric Overlaminate is flame-resistant[4] and REACH compliant[2]—a regulation of the European Union adopted to improve the protection of human health and the environment. With an end-to-end approach, the HP Latex printing system continues to drive a greater sustainable impact in large-format printing.

Save time with a reliable, total HP solution
Original HP printing materials, Original HP inks, and HP large format printers are designed to work together as a system to provide reliable, consistent, quality results that help save time.

Target customersApplicationsBenefits
Print service providersOverlaminate solutionHigh-performance UV polymeric calendered vinyl with dual use: brilliant image quality and an overlaminate for protection
Print film solutionEase of handling with the lay-flat double-sided, PE-coated silicone release liner
Indoor and outdoor signageProvides reassurance with REACH compliance[2]
Window graphicsCompatible with Original HP Latex Inks; also solvent, low-solvent, and UV-curable inks
Fleet graphicsFlame-resistant material[3]
Floor graphicsSlip resistant for floor graphics per ANSI A137.1/A326.3[2]

Technical Specifications

Ink technologyOriginal HP Latex Inks; also solvent, low-solvent, and UV-curable inks
Thickness (base vinyl)76 microns/3 mil per ISO 20534 Test Method
Base vinylCalendered high-performance polymeric vinyl with UV inhibitors
Liner140 g/m² double-sided PE-coated silicone paper
AdhesiveClear, permanent pressure-sensitive adhesive
FinishGloss, greater than 70 gloss units at 60˚ reflection
Display permanence
(Commercial in-window)
Over 5 years unlaminated, over 10 years laminated with HP 871 and 831 Latex Inks[5]
Indoor floor durabilityUp to 3 months in indoor dry environments
Water resistanceWater resistant with HP 871 and 831 Latex Inks[8]
Minimum application temperature4 to 35˚C (39 to 95˚F) on clean, dry surfaces
Service temperature-40 to 65˚C (-40˚ to 149˚F)[7]
Operating temperature15 to 35˚C (59 to 95˚F)
Operating humidity40 to 60% RH
LaminationCold lamination; recommend using HP Gloss or Matte Polymeric Overlaminates
Shelf life2 years, unopened in original packaging
Storage temperature21 to 23˚C (69 to 75˚F)
Storage humidity50% RH
Flame resistanceB1 approved fire certification
EnvironmentalREACH compliant[7]
Slip ratingThird-party certified according to ANSI A137.1/A326.3 and AS HB198:2014 (AS/NZS 4586)
Country of originProduct of the United States
300

Made in the USA

Ordering Information

Product NumberRoll SizesUPCRegion
6GA31A1067 mm x 50 m (42 in x 164 ft)848412024838Europe, Middle East, and Africa
6GA32A1372 mm x 50 m (54 in x 164 ft)848412024845Europe, Middle East, and Africa
6GA34A1524 mm x 50 m (60 in x 164 ft)848412024852Europe, Middle East, and Africa

Warranty Statement

HP large format printing materials are free from defects in materials and workmanship. For warranty statement, please see HPLFMedia.com/go/mediawarranties. To obtain warranty service, please contact Brand Management Group customer support at HPLFMedia.com/hp/en/contactus.

HP Latex 300 Printer series, HP Latex 500 Printer series, HP Latex 1500 Printer, and HP Latex 3000 Printer series

📘

Footnotes

1 Performance varies based on printer and print profile. Water resistance testing by
HP Image Permanence Lab on a range of
HP media and follows ISO 18935 method. For more information, see HPLFMedia.com/hp/printpermanence.
2 Per DIN 53363.
3 Per DIN EN ISO 2060.
4 Per DIN EN 1049-2.
5 100% per TAPPI T-425 Test Method.
6 Performance varies based on printer and print profile. Water resistance testing by HP Image Permanence Lab on a range of HP media and follows ISO 18935 method. For more information, see HPLFMedia.com/hp/printpermanence.
7 Based on internal HP testing exposure at -40°C (-40°F)/53% RH for 24 hours does not appear to have any effect on the peel strength from the substrate.

👍

Download Available

PDF - US
PDF - A4